The Hammer Crusher is a type of crusher that directly crushes materials with a maximum particle size of 600mm-1800mm to 25mm or below.
技術優勢/ TECHNICAL ADVANTAGES
The working hammer head is cast by a new process abrasion-resistance and impact-resistance.
The granularity can be adjusted according to customer requirements.
The collective structure is sealed to solve the problems of dust pollution and ash leakage in the crushing workshop.
The overall design has beautiful appearance, compact structure, few vulnerable parts and convenient maintenance.
主要用途/ MAIN PURPOSE
The Hammer Crusher is used to crush various materials with medium hard and weak abrasiveness. The compressive strength of materials is lower than 100Mpa, and the moisture content is lower than 15%. It can be used for crushing materials such as coal, salt, chalk, gypsum, brick and tile, limestone, etc. It can also be used for crushing materials such as broken wood and paper with strong fiber structure, elasticity and toughness, and recycled asbestos cement products. In addition, the Hammer Crusher can also replace the cone-type crusher in the production line of mineral processing.
工作原理/ OPERATING PRINCIPLE
The main working part in the Hammer Crusher is the rotor leading hammer (also known as hammer head). The rotor consists of spindle, disk, pin shaft and hammer. The motor drives the rotor to rotate at a high speed in the crushing cavity. The material is fed into the machine from the upper feeding port and crushed by the striking, impacting, shearing and grinding of the moving hammer at a high speed. At the lower part of the rotor, there is a sieve plate. The materials smaller than the size of the sieve hole in the material to be crushed are discharged through the sieve plate. And the coarse materials larger than the sieve hole size are blocked on the sieve plate, which are struck and ground by the hammer and discharged from the machine through the sieve plate.
施工案例? ? ? ?公司環境
新聞資訊? ? ? ?聯系我們
電話：136 0412 4805